Residential · Henderson, NV
Traditional stucco is still one of the best-performing exterior claddings for heat, sun, and daily wear, when it is built on the right base and detailed correctly. Serving Henderson since 2017, Superior Stucco Henderson installs and repairs hard-coat traditional stucco for homes and commercial buildings, from full re-stucco to targeted patching and matching finishes.
Prep and base work determine whether traditional stucco lasts or fails. We inspect the substrate, then install a proper water-resistive barrier (Grade D building paper or equivalent) with lapped seams, weep screed at the bottom, and correct flashing tie-ins at windows, doors, and roof-to-wall transitions. Next comes self-furred metal lath (2.5 lb diamond mesh or welded wire where specified), fastened to framing on layout, followed by a scratch coat and brown coat using a cement-lime plaster mix. We control coat thickness and embedment so the system keys into the lath and cures evenly, reducing cracking and hollow spots.
In Southern Nevada, intense UV, low humidity, and big temperature swings demand smart curing and a finish that fits the building. We plan hot-weather application, fog-mist curing as needed, and clean control joints to manage movement on larger walls. For the finish coat, we match existing color and texture with acrylic finish, cement finish, or an integral-color stucco finish, including sand float, lace, dash, or smooth (where appropriate). If you have hairline cracks, impact damage, or delamination, we cut back to sound material, re-lath when required, and blend the new finish so repairs read clean from the street.
Henderson customers choose us because we build traditional stucco the way it is supposed to be built, not rushed and not skipped. We focus on details that prevent callbacks, straight weep screeds, proper lath overlaps, clean corners with galvanized corner bead, and consistent thickness across planes. Crews show up with the right equipment for the job, including mortar mixers, plaster pumps when appropriate, hawk and trowel hand work for edges, and dust control for repairs. You get clear scope, realistic scheduling, and straightforward communication from the first site visit through final cleanup.
Before we wrap, we do a walkthrough to confirm finish consistency, joint placement, sealant transitions, and clean lines at trims and penetrations. We protect landscaping and hardscape, remove debris daily, and leave the site ready for paint (if specified) or final coating. You receive a free written estimate, documented repair recommendations when issues extend beyond the surface, and practical care guidance on curing time and when to apply elastomeric paint or breathable coatings. If we find underlying moisture intrusion or framing movement, we explain the options so your traditional stucco repair solves the cause, not just the symptom.
We do both. We handle small patches and crack repairs, and we also take on full re-stucco and larger restoration projects when the existing system is failing or heavily patched.
In most cases, yes. We match common textures like sand-float, lace, skip-trowel, and dash by sampling and adjusting aggregate, trowel technique, and finish timing, then blending as needed.
Yes. We repair EIFS base coat and mesh, replace damaged foam shapes, and re-finish with compatible acrylic materials so the system performs as intended.
Small repairs can be completed in a day, but curing and finish blending can add time. Larger repairs or re-stucco projects depend on access, prep scope, and dry times between coats.
Yes. We provide a written estimate that outlines the repair method, materials, finish or coating, and any exclusions so you can make an informed decision.
Traditional stucco, also called hard-coat stucco, is a cement-based exterior plaster system built in layers over a water-resistive barrier and metal lath. When installed with correct moisture management, fastening, and curing, it delivers a tough, fire-resistant shell with strong impact performance and a finish that can be matched for decades. Superior Stucco Henderson handles new installation, re-stucco, and repair work for residential and commercial walls, with an emphasis on doing the base right so the finish stays sound.
A quality traditional stucco installation starts with drainage. We install and lap the water-resistive barrier, then detail window and door openings so water sheds to the exterior. Metal lath is selected and fastened correctly so the plaster keys in, then the scratch coat is scored to create mechanical bond for the brown coat. We control thickness and plane to keep walls straight, corners crisp, and reveals consistent, then apply the selected finish coat for the final texture and color.
For repairs, we diagnose what you are seeing on the surface, step cracks, spider cracking, staining, hollow areas, or loose sections, and trace it back to the cause. That might be impact damage, failed sealant, missing control joints, or moisture getting behind the system. Repairs are cut back to solid stucco, re-lathed when needed, and rebuilt with compatible mixes, then finished to match the surrounding texture. The goal is a repair that performs like the original system and does not telegraph through paint.
If you want traditional stucco that looks right and holds up in desert conditions, the difference is in the prep, detailing, and cure time. Ask us for a free written estimate, and we will walk the site, point out risk areas, and recommend the most durable approach for your walls, trims, and penetrations.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Henderson. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
