Residential · Henderson, NV
If the bottom edge of your stucco is cracked, swollen, or stained, the problem is often the stucco weep screed and flashing details, not just the finish coat. Superior Stucco Henderson has served Henderson since 2017, repairing weep screeds, base flashing, and stucco terminations to help walls drain and dry correctly.
We start by locating the failure points at the base of the wall, windows, doors, patios, and roof-to-wall transitions where step flashing meets stucco. Our crew protects hardscape, sets up dust control, then removes stucco carefully to expose the weep screed, paper, lath, and the bottom plate area without tearing back more than needed. We look for buried weep screed, missing 3 1-2 inch clearance to grade, clogged weep holes, rusted galvanized components, loose casing beads, and compromised WRB. Repairs typically include replacing damaged weep screed and flashing, installing new Grade D building paper or a drainage mat where appropriate, tying into existing lath with corrosion-resistant fasteners, then rebuilding the base with a proper scratch coat and brown coat before texture.
Southern Nevada heat, wind-driven rain, hard irrigation spray, and stucco-to-concrete contact can trap moisture at the base and accelerate corrosion and swelling. We address those local conditions by restoring a true drainage plane and keeping the bottom edge open so water can exit, not wick upward into the wall assembly. Matching the finish is the last step, not the first, so we blend color and texture only after the base is correctly detailed. We can replicate common finishes like sand-float, lace, smooth trowel, and dash, and we tool clean termination lines at control joints and casing beads so the patch does not telegraph.
Customers choose Superior Stucco Henderson because we treat stucco weep screed work as water-management, not cosmetic patching. Being licensed and insured matters when we are opening the base of a wall, working around electrical penetrations, and tying new flashing into existing paper and lath. You get clear scope, photos of what we uncover, and straightforward options when we find hidden issues like deteriorated sheathing, rusted lath, or an improperly lapped WRB. Our repairs focus on correct overlaps and sequencing so the system drains as intended, with no shortcuts like burying the screed in new plaster.
After the stucco rebuild cures, we walk the project with you and point out the repaired terminations, the restored clearance at grade, and any irrigation or landscape changes needed to keep the base dry. We clean up debris, haul away removed plaster and metal, and leave the site ready for use the same day the finish work is complete. You receive a free written estimate up front, a documented scope of what was repaired, and practical maintenance notes for caulking, sealants, and water sources near the wall. If matching an older color is difficult, we will explain realistic blend lines and coating options before we start so there are no surprises.
seo_block': {'heading': 'Stucco Weep Screed Repair and Flashing Repair in Henderson, NV', 'intro': 'A stucco weep screed is the metal edge at the base of a stucco wall that helps drain moisture out of the plaster system. When the screed is missing, rusted, clogged, or buried below soil or concrete, water can stay trapped behind the stucco, leading to staining, cracking, soft spots, and even rot. Superior Stucco Henderson focuses on repairing the actual drainage and flashing details, not just resurfacing the visible damage.', 'highlights': ['Restore proper drainage at the base of stucco walls', 'Replace rusted or buried weep screed and flashing', 'Tie new WRB and lath into existing assemblies', 'Match sand-float, lace, smooth, and dash textures', 'Reduce recurring cracks, bubbling, and base staining', 'Free written estimate with clear repair scope'], 'body': ['Weep screed problems often show up as a persistent dark band near the bottom of the wall, crumbling stucco at the base, or efflorescence. The fix is usually a targeted removal to expose the termination, then reworking the layers in the right order: weather-resistive barrier laps over flashing, lath properly fastened, then scratch coat and brown coat rebuilt to the correct thickness before texture. When we find blocked drainage, we correct the opening at the screed so water can exit instead of wicking into the plaster.', 'Flashing is part of the same system. Roof-to-wall intersections, patios, decks, and window heads can direct water behind the stucco if step flashing, kickout flashing, or head flashing is missing or poorly integrated with the WRB. We correct those details and rebuild the stucco so it terminates cleanly against casing beads and control joints, reducing future cracking.', 'If you suspect a stucco weep screed issue, we can inspect, explain what is happening, and provide a written plan for repair. The goal is a base detail that drains, dries, and blends with your existing finish, with documentation of the work completed and guidance on keeping sprinklers, soil, and concrete from burying the screed again.']}
We do both. We handle small patches and crack repairs, and we also take on full re-stucco and larger restoration projects when the existing system is failing or heavily patched.
In most cases, yes. We match common textures like sand-float, lace, skip-trowel, and dash by sampling and adjusting aggregate, trowel technique, and finish timing, then blending as needed.
Yes. We repair EIFS base coat and mesh, replace damaged foam shapes, and re-finish with compatible acrylic materials so the system performs as intended.
Small repairs can be completed in a day, but curing and finish blending can add time. Larger repairs or re-stucco projects depend on access, prep scope, and dry times between coats.
Yes. We provide a written estimate that outlines the repair method, materials, finish or coating, and any exclusions so you can make an informed decision.
A stucco weep screed is the metal termination at the bottom of a stucco wall that lets trapped moisture drain out of the plaster system. When the weep screed is missing, rusted, clogged, or buried below soil, pavers, or concrete, water can stay behind the stucco and cause staining, cracks, soft spots, and hidden decay. Superior Stucco Henderson repairs the drainage and flashing details first, then restores the stucco layers and finish for a clean, lasting result.
Weep screed issues often show up as a dark stain band near the bottom of the wall, crumbling stucco at grade, or efflorescence. The correct repair is usually a controlled removal to expose the termination, then rebuilding the assembly in the right sequence, weather-resistive barrier lapped correctly over flashing, lath tied in with corrosion-resistant fasteners, then scratch coat and brown coat before the finish coat. If drainage is blocked, we restore the open path so moisture can exit instead of wicking upward.
Flashing problems can feed the same damage. Roof-to-wall intersections, patios, decks, and window and door openings can direct water behind stucco if step flashing, kickout flashing, or head flashing is missing or not integrated with the WRB. We correct those transitions, then rebuild the stucco to terminate cleanly at casing beads and control joints so the repair is both functional and neat.
If you suspect a stucco weep screed problem, we can inspect the base and adjacent flashings, explain what we find, and provide a written plan. You will know what gets removed, what gets replaced, and how we will blend the finish, plus practical guidance on maintaining clearance from soil and avoiding constant irrigation spray at the base of the wall.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Henderson. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
